- \n
- Silo and hopper scales<\/li>\n
- Crane scales<\/li>\n
- Rail weighbridges<\/li>\n
- Scrap bucket, roller train, and tundish scales<\/li>\n
- Platform scales<\/li>\n<\/ul>\n
CONSTRUCTION<\/strong><\/p>\n
- \n
- Low and compact design<\/li>\n
- Galvanized surface<\/li>\n
- Protected to IP 67<\/li>\n<\/ul>\n
FUNCTION<\/strong><\/p>\n
- \n
- High degree of reliability and availability<\/li>\n
- Virtually impervious to shock loads and unavoidable side forces<\/li>\n
- No need for additional tie-rods and hold-downs<\/li>\n<\/ul>\n
Mounting Dimensions<\/strong><\/p>\n
![\"\"](\"https:\/\/casscale.net\/wp-content\/uploads\/2026\/01\/DWB-11-1.png\")
<\/p>\nOperating Principle<\/strong><\/p>\n
![\"\"](\"https:\/\/casscale.net\/wp-content\/uploads\/2026\/01\/DWB-11-2.png\")
<\/p>\nTechnical Data<\/strong><\/p>\n
\n\n
\n <\/td>\n <\/td>\n DWB 11.5 t<\/strong><\/td>\n DWB 15 t<\/strong><\/td>\n DWB 25 t<\/strong><\/td>\n Reference<\/strong><\/td>\n<\/tr>\n \n Rated capacity<\/td>\n Ln<\/sub><\/td>\n 11.5 t<\/td>\n 15 t<\/td>\n 25 t<\/td>\n <\/td>\n<\/tr>\n \n Limit load (with Lq<\/sub> = 0.15xLn<\/sub>)<\/td>\n LI<\/sub><\/td>\n 23 t<\/td>\n 26 t<\/td>\n 35 t<\/td>\n <\/td>\n<\/tr>\n \n Rupture load (with Lq<\/sub> = 0.15xLn<\/sub>)<\/td>\n Ld<\/sub><\/td>\n 35 t<\/td>\n 38 t<\/td>\n 40 t<\/td>\n <\/td>\n<\/tr>\n \n Max. admissible side load<\/td>\n Lqmax<\/td>\n 15 t<\/td>\n 18 t<\/td>\n 25 t<\/td>\n <\/td>\n<\/tr>\n \n Sensitivity<\/td>\n Cn<\/sub><\/td>\n 0.90 mV\/V<\/td>\n 1.16 mV\/V<\/td>\n 1.40 mV\/V<\/td>\n Ln<\/sub><\/td>\n<\/tr>\n \n Combined error<\/td>\n Fcomb<\/td>\n \u00b1 0.15 %<\/td>\n Cn<\/sub><\/td>\n<\/tr>\n \n Creep (30 m)<\/td>\n Fcr<\/td>\n \u00b1 0.05 %<\/td>\n Cn<\/sub><\/td>\n<\/tr>\n \n Input resistance<\/td>\n Re<\/sub><\/td>\n 378 W<\/td>\n 378 W<\/td>\n 756 W<\/td>\n Tr<\/sub><\/td>\n<\/tr>\n \n Output resistance<\/td>\n Ra<\/sub><\/td>\n 350 W<\/td>\n 350 W<\/td>\n 700 W<\/td>\n Tr<\/sub><\/td>\n<\/tr>\n \n Ref. supply voltage<\/td>\n Usref<\/td>\n 10V<\/td>\n <\/td>\n<\/tr>\n \n Max. supply voltage<\/td>\n Usmax<\/td>\n 18V<\/td>\n 18V<\/td>\n 36V<\/td>\n <\/td>\n<\/tr>\n \n Nominal temperature range<\/td>\n Btn<\/td>\n – 10\u00b0C to + 40\u00b0C<\/td>\n <\/td>\n<\/tr>\n \n Service temperature range<\/td>\n Btu<\/td>\n – 15\u00b0C to + 80\u00b0C (HT quality + 120\u00b0C)<\/td>\n <\/td>\n<\/tr>\n \n Reference temperature<\/td>\n Tr<\/sub><\/td>\n + 22\u00b0C<\/td>\n <\/td>\n<\/tr>\n \n Storage temperature range<\/td>\n Bts<\/td>\n – 30\u00b0C to + 85\u00b0C ( HT quality + 120\u00b0C)<\/td>\n <\/td>\n<\/tr>\n \n Temperature effect on zero signal<\/td>\n TKo<\/sub><\/td>\n \u00b1 0.1% \/ 10K ( HT quality: \u00b1 0.05%)<\/td>\n Cn<\/sub> in Btu<\/sub><\/td>\n<\/tr>\n \n Temperature effect on sensitivity<\/td>\n TKc<\/sub><\/td>\n \u00b1 0.07% \/ 10K ( HT quality: \u00b1 0.05%)<\/td>\n <\/td>\n<\/tr>\n \n Dead weight<\/td>\n me<\/sub><\/td>\n 18kg<\/td>\n 18kg<\/td>\n 18kg<\/td>\n <\/td>\n<\/tr>\n \n Corrosion protection<\/td>\n <\/td>\n hot dip galvanized<\/td>\n <\/td>\n<\/tr>\n \n Protection class<\/td>\n <\/td>\n IP 67<\/td>\n <\/td>\n<\/tr>\n \n Cable specification<\/td>\n <\/td>\n silicone RAL 7000 (grey)<\/p>\n \u00d8 6.5mm x 15m \u2013 30\u00b0C to + 150\u00b0C<\/td>\n
<\/td>\n<\/tr>\n \n Colour code<\/td>\n <\/td>\n black\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 : input + (82) \/ blue : input – (81) red\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 : output + (28) \/ white : output – (27) green-yellow : screening<\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Contact surfaces quality requirements<\/strong><\/p>\n
![\"\"](\"https:\/\/casscale.net\/wp-content\/uploads\/2026\/01\/DWB-11-3.png\")
<\/p>\n\n\n
\n \u25a0<\/td>\n Material \u201cA\u201d:<\/p>\n Usually, construction steel of<\/td>\n
\u25a0<\/td>\n Angular error to vertical axle \u201cE\u201d:<\/td>\n<\/tr>\n \n <\/td>\n a minimum quality S355 is<\/td>\n <\/td>\n The connecting surface angle<\/td>\n<\/tr>\n \n <\/td>\n used<\/td>\n <\/td>\n may differ from the vertical.<\/td>\n<\/tr>\n \n <\/td>\n <\/td>\n <\/td>\n axle in both planes of view by<\/td>\n<\/tr>\n \n \u25a0<\/td>\n Plate thickness \u201cB\u201d:<\/p>\n Plate thickness depends on<\/td>\n
<\/td>\n max. \u00b1 2\u00b0<\/td>\n<\/tr>\n \n <\/td>\n total construction stiffness. Connecting surfaces plate<\/td>\n \u25a0<\/td>\n Plane parallelity \u201cF\u201d: The upper and lower<\/td>\n<\/tr>\n \n <\/td>\n thickness must be at least<\/td>\n <\/td>\n connecting surfaces to the<\/td>\n<\/tr>\n \n <\/td>\n 40% of weighbeam height<\/td>\n <\/td>\n weighbeam must be plane<\/td>\n<\/tr>\n \n <\/td>\n <\/td>\n <\/td>\n parallel to minimum 0.1 mm<\/td>\n<\/tr>\n \n \u25a0<\/td>\n Surface quality \u201cC\u201d:<\/p>\n The requisite mean rough<\/td>\n
<\/td>\n <\/td>\n<\/tr>\n \n <\/td>\n value of connecting surfaces<\/td>\n <\/td>\n <\/td>\n<\/tr>\n \n <\/td>\n is around 6.3\u00b5m<\/td>\n <\/td>\n <\/td>\n<\/tr>\n \n \u25a0<\/td>\n Planeness \u201cD\u201d:<\/p>\n The maximum admissible<\/td>\n
<\/td>\n <\/td>\n<\/tr>\n \n <\/td>\n tolerance of each contact<\/td>\n <\/td>\n <\/td>\n<\/tr>\n \n <\/td>\n surface is 0.05 mm<\/td>\n <\/td>\n <\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n \n\n
\n Variants<\/strong><\/td>\n Order No.<\/strong><\/td>\n<\/tr>\n \n DWB 11.5 t<\/td>\n D 703 100.01<\/td>\n<\/tr>\n \n DWB 15 t<\/td>\n D 703 100.02<\/td>\n<\/tr>\n \n DWB 25 t<\/td>\n D 704 280.03<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Options:
\nHT quality for service
\ntemperature up to 120\u00b0C<\/p>\n\n\n
\n Variants<\/strong><\/td>\n Order No.<\/strong><\/td>\n<\/tr>\n \n DWB 11.5 t HT<\/td>\n D 703 100.04<\/td>\n<\/tr>\n \n DWB 25 t HT<\/td>\n D 704 280.05<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n <\/p>\n
<\/p>\n","protected":false},"excerpt":{"rendered":"
- \n
- Simple and economical installation through direct screwing onto the connecting structure<\/li>\n
- Transmission of high interferential forces and moments at minimal impact on measurement value<\/li>\n
- Extremely low headroom<\/li>\n
- Designed for rugged environment<\/li>\n
- Suitable for construction of service free scales<\/li>\n
- Option: HT-type for service temperature up to 120\u00b0C<\/li>\n<\/ul>\n","protected":false},"featured_media":286872,"comment_status":"open","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[5437],"product_cat":[3382],"product_tag":[5034],"class_list":{"0":"post-286879","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_brand-schenck-process","7":"product_cat-bending-shear-beam-en","8":"product_tag-beam-load-cell-en","10":"first","11":"instock","12":"taxable","13":"shipping-taxable","14":"product-type-simple"},"acf":[],"aioseo_notices":[],"_links":{"self":[{"href":"https:\/\/casscale.net\/en\/wp-json\/wp\/v2\/product\/286879","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/casscale.net\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/casscale.net\/en\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/casscale.net\/en\/wp-json\/wp\/v2\/comments?post=286879"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/casscale.net\/en\/wp-json\/wp\/v2\/media\/286872"}],"wp:attachment":[{"href":"https:\/\/casscale.net\/en\/wp-json\/wp\/v2\/media?parent=286879"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/casscale.net\/en\/wp-json\/wp\/v2\/product_brand?post=286879"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/casscale.net\/en\/wp-json\/wp\/v2\/product_cat?post=286879"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/casscale.net\/en\/wp-json\/wp\/v2\/product_tag?post=286879"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}