{"id":311259,"date":"2026-07-21T16:25:50","date_gmt":"2026-07-21T07:25:50","guid":{"rendered":"https:\/\/casscale.net\/?post_type=product&p=311259"},"modified":"2026-07-21T16:27:39","modified_gmt":"2026-07-21T07:27:39","slug":"hbm-paceline-cmc","status":"publish","type":"product","link":"https:\/\/casscale.net\/en\/product\/hbm-paceline-cmc\/","title":{"rendered":"HBM PACEline CMC"},"content":{"rendered":"
\n
\n
\n

CMC Series Piezoelectric Measurement Chains for Capacities ranging from 5 kN to 120 kN<\/h2>\n

Piezoelectric measurement chains of the CMC series are used in various industrial production tasks and reliably convert the forces they measure into a 0 to 10 V signal. They are calibrated throughout, which means that the measurement amplifier doesn\u2019t have to be adjusted and the relationship between the output signal in volts and the force measurement in newtons is clearly documented in the accompanying documents.<\/p>\n

Typical for the piezoelectric principle, the sensors have a wide measurement range and measure large and small forces reliably \u2013 even under a high initial load. The measurement chains, based on CFT variations with a 5 kN or 20 kN capacity are calibrated at 100% and at 20% of the nominal force, while all other CMC measurement chains have calibrations at 1%, 10% and 100% of their nominal force. The measurement ranges can be switched via a digital input on the charge amplifier; zeroing is triggered just as easily.<\/p>\n

All piezoelectric force measurement chains in the CMC series consist of a pre-stressed and calibrated sensor, a charge cable and a charge amplifier. The components can be\u00a0freely combined\u00a0and allow the measurement chain to ideally adapt to the respective measurement task at hand.<\/p>\n<\/div>\n\n\n\n\n\n\n\n\n\n\n\n
PACEline CMC<\/caption>\n
Maximum capacity (nominal load)<\/td>\n5 kN, 20 kN, 25 kN, 50 kN, 70 kN, 120 kN<\/td>\n<\/tr>\n
Tensile \/ compression<\/td>\nCompression<\/td>\n<\/tr>\n
Type\/technology<\/td>\nPiezoelectric<\/td>\n<\/tr>\n
Calibration<\/td>\nCalibrated<\/td>\n<\/tr>\n
Output signal<\/td>\nVoltage (0\u202610V)<\/td>\n<\/tr>\n
Degree of protection<\/td>\nIP65<\/td>\n<\/tr>\n
Mechanical interfaces<\/td>\nBoth side flange mounting, Both sides central internal thread<\/td>\n<\/tr>\n
Height (without accessories)<\/td>\n10 mm, 14 mm<\/td>\n<\/tr>\n
Diameter (without cable or plug)<\/td>\n54 mm, 19 mm, 30 mm, 13 mm, 36 mm<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
\n
\n
\n

Reliable and suitable for industrial use<\/h3>\n