AEP transducers / TPUSB / Pressure transducer

I trasmettitori di pressione di questa serie si distinguono per la grande affidabilità e stabilità a lungo termine.
Elevata resistenza meccanica, adatto per applicazioni dinamiche.
La parte sensibile a contatto con la pressione è interamente realizzata in acciaio inox 17-4 PH resistente alla corrosione.
Grado di protezione IP65.
Attacco standard 1/4″ Gas Maschio
Connettore standard M12

Category:

Description

Pressure transmitters for RELATIVE, ABSOLUTE and VACUUM measures Nominal pressures from 100 mbar to 2000 bar Linearity and hysteresis 0,10% or 0.05% Digital Output

Pressure transmitters in these series distinguish themselves for high long-term reliability of mechanical and electrical features.
High vacuum thermal treatments which stainless steel is subjected to, ensure the correct functioning even when highly dynamic stresses are involved. Monolithic execution of measuring element, without any assembling via tight rings or gaskets, guarantees a high long-term stability, with negligible hysteresis and zero drift. Pressure is internally detected by a full bridge strain gauge, which assures the maintenance of performances even in presence of peaks.
Using the free supplied software, you can make the configuration parameters, record in real-time graphics (DATA LOGGER), save the data and export to Excel for further analysis
These features make them suitable for being used in several industrial fields, as: pneumatic, hydraulic, food process control, level and refrigerating (depression) plants. They are also installed on test benches, materials testing machines, laboratories and research in general.

Dimensions

Technical Data

GAUGE PRESSURE (R)
Zero at atmospheric pressure
1 – 2.5 – 5 – 10 – 20 bar
ABSOLUTE PRESSURE (A)
Zero at pressure to absolute vacuum
50 – 100 – 250 – 350 – 500 – 700 bar
*1000 – *1500 – *2000 – *3000 bar
LINEARITY and HYSTERESIS ± 0.10 % (see options)
INTERNAL RESOLUTION
READINGS PER SECONDS
2.000.000 div.
5 – 20 – 120 – 600 – 1200 – 2400 – 4800
TEMPERATURE INDICATION
Resolution
Class
0.1 °C
± 2 °C
ZERO FUNCTION
PROGRAMMABLE DIGITAL FILTER
PROGRAMMABLE RESOLUTION
UNITS OF MEASUREMENT
PEAK FUNCTION
50%
Average mobile on 1-2-4-8-16-32 points
1, 2, 5, 10, 20, 50, 100
mbar, bar, MPa, kPa, psi, kg/cm², mHg, mH₂O, mmH₂O
Pos. (+) and Neg. (-)
TEMPERATURE EFFECT (1°C)
a) on zero
b) on sensitivity
≤ ± 0.015%
≤ ± 0.015%
NOMINAL POWER SUPPLY 5 Vdc — Supply via USB port
LIMIT MECHANICAL VALUES REFERRED TO NOMINAL PRESSURE:
a) service pressure
b) max. permissible pressure
c) breaking pressure
d) highly dynamic pressure
100%
150%
>300%
75%
REFERENCE TEMPERATURE
WORKING TEMPERATURE
STORAGE TEMPERATURE
+23°C
-10 / +70°C
-20 / +80°C
PROCESS COUPLING
TIGHTENING WRENCH
TIGHTENING TORQUE
1/4″ Gas (*1/2″ Gas) — BSP Male
27 mm
28 Nm
PROTECTION CLASS (EN 60529)
SENSOR EXECUTION MATERIAL
ELECTRICAL CONNECTION
IP65
INOX 17-4 PH
4 poles M12 male connector with 2m M12-to-USB cable

Options: LINEARITY and HYSTERESIS £ ± 05 %

Standard indications

Pressure Display (bar) Resolution
1 bar 1,0000 0,0001
2,5 bar 2,5000 0,0005
5 bar 5,0000 0,0005
10 bar 10,000 0,001
20 bar 20,000 0,002
50 bar 50,000 0,005
100 bar 100,00 0,01
250 bar 250,00 0,02
350 bar 350,00 0,05
500 bar 500,00 0,05
700 bar 700,00 0,05
1000 bar 1000,0 0,1
1500 bar 1500,0 0,2
2000 bar 2000,0 0,2

Electrical connections

Reviews

There are no reviews yet.

Be the first to review “AEP transducers / TPUSB / Pressure transducer”