Description
Pressure transmitters for RELATIVE and ABSOLUTE measures Nominal pressures from 5 bar to 2500 bar AMPLIFIED outputs: 4-20mA, 10V or 5Volt Linearity and hysteresis 0,20% HIGH TEMPERATURE max. 150 ° C
Pressure transmitters of these series have been developed to extend to high temperature (150°) the well-known and appreciated features of TP3 transmitters.
The sensitive part, in contact with pressure, is entirely made of 17-4 PH corrosion-proof stainless steel.
High vacuum thermal treatments which stainless steel is subjected to, ensure the correct functioning even when highly dynamic stresses are involved. Monolithic execution of measuring element, without any assembling via tight rings or gaskets, guarantees a high long-term stability, with negligible hysteresis and zero drift. Pressure is internally detected by a full bridge strain gauge, which assures the maintenance of performances even in presence of peaks.
Electronic section, realised via SMD technology, consists of a high precision instrumental amplifier and a stable supplier,
protected against short circuits and polarity inversion.
Every pressure transmitters is entirely LASER welded and completely resin-encapsulated, to ensure insensitivity and a high degree of hermetic tight.
During production cycle, pressure transducers are thermally compensated, tested and individually calibrated with the use of completely automated stations that analyse and record data.
These features make them suitable for being used in several industrial fields, as : pneumatic, hydraulic, food process control, level and refrigerating (depression) plants. They are also installed on test benches, materials testing machines, laboratories and research in general.
Technical Data
| RELATIVE PRESSURE (R) Zero at atmospheric pressure |
5 – 10 – 20 bar 50 – 100 – 250 – 350 – 500 – 700 bar *1000 – *1500 – *2000 – *2500 bar |
| LINEARITY and HYSTERESIS | ≤ ± 0.20 % |
| TEMPERATURE EFFECT (1°C) a) on zero b) on sensitivity |
≤ ± 0.015% ≤ ± 0.015% |
| NOMINAL SENSITIVITY | 4-20mA (3 wires) 0-5 V, 0-10 V |
| CALIBRATION TOLERANCE | ≤ ± 0.1% |
| NOMINAL POWER SUPPLY | 4-20mA and 0-5V 🠒 12-24Vdc 0-10V 🠒 15-24Vdc |
| MAX. POWER SUPPLY MAX. ABSORPTION LOADING RESISTANCE a) tension b) current INSULATION RESISTANCE ZERO BALANCE / RESPONSE FREQUENCY |
28Vdc 30mAmin. 3KΩ from 0 to 470Ω >2 GW ≤ ± 10% ADJ. from 0.5 to 5 kHz |
| LIMIT MECHANICAL VALUES REFERRED TO NOMINAL PRESSURE a) service pressure b) max. permissible pressure c) breaking pressure d) highly dynamic pressure |
100% 150% >300% 75% |
| REFERENCE TEMPERATURE / MEDIUM TEMPERATURE / AMBIENCE TEMPERATURE / STORAGE TEMPERATURE | +23°C -10/+150°C -10/+70°C -20/+80°C |
| PROCESS COUPLING / TIGHTENING WRENCH / TIGHTENING TORQUE | 1/4″Gas (*1/2″Gas) Maschio / BSP Male 27 mm 28 Nm |
| PROTECTION CLASS (EN 60529) SENSOR EXECUTION MATERIAL ELECTRICAL CONNECTION |
IP65 INOX 17-4 PH Connettore M12X1 completo di CAVO costampato schermato PVC, Ø5.2mm a 4 conduttori Ø0.34mm² con schermo condotto sulla ghiera. Lunghezza 3m Connector M12X1 complete of molded shielded PVC CABLE, Ø5.2mm with 4 Ø0.34mm² conductors, shield on lock nut. Length 3m |
OPTION
MOCA certification for food applications (pressure ≥ 20bar)
Electrical connections
(1)ZERO adjustment is accessible by unscrewing the cap
Reviews
There are no reviews yet.