Description
Compression load cell RH10X with a Rated Load of 100 … 1000 t
PRODUCT FEATURES
- Compression load cell made of stainless steel, welded construction (Protection class IP68)
- Accuracy up to ±0.2%
- Spherical load button for perfect alignment of the load
- Low profile design
- Ideally suited for industrial weighing and level control applications
- ATEX 2014/34/EU version available for hazardous areas (optional)
APPLICATIONS
- Food industry
- Coal and steel industry
- Chemical and pharmaceutical industry
- Waste management / recycling
- Packaging technology
| Article-No. | Rated Load E [t] | Dimensions [mm] | Weight [kg] | |||||||||||
| Ø A | Ø B | Ø C | Ø D | Ø E | F | G | H | Ø P | Q | R | S | |||
| 111188 | 100 |
229 |
87 |
200 |
10.5 |
136.5 |
70 |
10 |
2 |
16.5 |
30 |
60 |
10.5 |
25 |
| 111189 | 200 | |||||||||||||
| 111192 | 300 | 299 | 155 | 260 | 12.5 | 228 | 85 | 12 | 2 | 18.5 | 30 | 60 | 12.5 | 42 |
| 111193 | 500 |
299 |
155 |
260 |
12.5 |
230 |
120 |
14 |
2 |
18.5 |
30 |
60 |
12.5 |
60 |
| 111194 | 750 | |||||||||||||
| 112271 | 1000 | 323 | 175 | 285 | 12.5 | 250 | 140 | 15 | 2 | 18.5 | 30 | 60 | 12.5 | 83 |
Upper Plate (option):
| Article-No. | Rated Load E [t] | Dimensions [mm] | |||
| Ø I | Ø L | M | N | ||
| 111195 | 100, 200 | 119 | 88 | 60 | 5 |
| 111196 | 300 | 198 | 156 | 60 | 5 |
| 111197 | 500, 750 | 198 | 156 | 89 | 9 |
| 119653 | 1000 | 229 | 176 | 99 | 11 |
Connection Assignment
| Electrical Connection | |
| Function | Wire Color |
| Excitation (+) | Red |
| Signal (+) | Green |
| Signal (-) | White |
| Excitation (-) | Black |
| Sensing (+) | Blue |
| Sensing (-) | Brown |
Technical Data
| Type | RH10X | |
| Version | – | |
| Rated load E | t | 100; 200; 300; 500; 750; 1000 |
| Maximum load for approved weighing Emax | t | – |
| Accuracy class OIML R60 | – | |
| Maximum numbers of load cell intervals nmax | d OIML | – |
| Minimum verification interval vmin | t | – |
| Creep division factor Z = Emax / 2 x DR | – | |
| Combined error | % E | ±0.21 |
| Temperature coefficient of zero signal | % E/ °C | ±0.005 |
| Temperature coefficient of characteristic value | % E / °C | ±0.005 |
| Load creep dcr, F in 30 min. | % E | ±0.03 |
| Zero balance | % E | ±1 |
| Rated output at E Cnom | mV/V | 2 ±0.1 %1 |
| Rated range of excitation voltage BU, nom | V | 1 … 15 |
| Input resistance Re | Ω | 700 ±20 |
| Output resistance Ra | Ω | 700 ±5 |
| Insulation resistance Ris | MΩ/50V | 2000 |
| Electrical connection | Cable, PVC, 10 m | |
| Rated temperature range BT, nom | °C | -10 … 50 |
| Operating temperature range BT, G | °C | -20 … 60 |
| Limit load Elim | % Emax | 150 |
| Breaking load Eb | % Emax | 300 |
| Level of protection | EN 60529 | IP68 |
| Material | Stainless steel | |
| Weight | kg | See drawing |
Options
| Article-No. | Description |
| 107798 | ATEX 2014/34/EU, IECEx:
ex II 1 G/D, Ex ia IIC T6 Ga, Ex ia IIIC T80 °C Da, IP6X, -20 °C < Ta < +60 °C (zones gaz 0/1/2, dust 20/21/22) |
| 115049 | ATEX 2014/34/EU, IECEx:
ex II 1 D, Ex ta IIIC T125 °C Da, IP6X, -20 °C < Ta < +60 °C (zones dust 20/21/22) |
| 115048 | ATEX 2014/34/EU, IECEx: ex II 3 G, Ex nA IIC T6 Gc, -20 °C < Ta < +60 °C (zone gaz 2) |
| – | Upper plate see drawing |
Electrical Connection
| Article -No. | Description |
| 10323 | Male cable connector KS6 (6-pin, Series 581) incl. mounting |
| 10320 | Male cable connector KSSH15 (15-pin) incl. mounting |
| 43418 | Input connector ZA9612FS (ALMEMO) incl. sensor mounting and connector calibration |
| 49205 | Input connector ZKD712FS (ALMEMO 202) incl. sensor mounting and connector calibration |
Reviews
There are no reviews yet.