Description
HISP1 – C2® Stainless Steel Single Point Load Cell (7.5 kg – 200 kg)
Hardy’s ADVANTAGE® Single Point Load Cells are designed to provide exceptional performance in a safe and predictable manner. Predominantly used in packing and OEM applications, this line of precision load cells comes with quick, easy, and accurate C2® electronic calibration.
They are also ideal for bench scales, which require a low sensitivity to off center loads. They are built to perform in the harsh environments found in the food, chemical, and allied industries.
The sensors are 17-4 PH stainless steel with C2® calibration capabilities and come with three meters (9-10 ft) of cable.
The HI SP1 is available in capacities from 7.5kg to 200kg (16.5 to 440lbs). Each is environmentally protected with a plastic covering to IP67 (IP65 for 7.5 and 10kg) and has an integral mounting spacer.
Specifications
| SPECIFICATIONS | HI SP1 |
| Capacity lbs | 16.5/22/33/66/110/165/220/440 |
| Capacity kg | 7.5/10/15/30/50/75/100/200 |
| Rated Output (ES) | 2±0.10mV/V |
| Non-Linearity | <±0.0166 % R.O. |
| Hysteresis | <±0.0166 % R.O. |
| Zero Balance | <±5.0 % R.O. |
| Combined Error | <±0.02 % R.O. |
| Creep @ 30 Min. | <±0.0166 % R.O. |
| Temp Effect Output | <±0.0140 % R.O./C |
| Temp Effect Sensitivity | <±0.010 % R.O./C |
| Input Resistance | 390 ± 20 ohm |
| Output Resistance | 330 ± 25 ohm |
| Insulation Resistance | ≥5000 Mohm |
| Excitation | 5 – 15 vdc |
| Safe Load Limit | 200 % Emax |
| Ultimate Load | 300 % Emax |
| Safe Side Load | 100 % Emax |
| Hazardous | FM IS, Class1, Div 1 |
| IP Rating | IP67 (IP65 for 7.5 & 10 KG) |
| Warranty | Two years |
ORDERING INFORMATION
No mounting hardware. Shipping Wt. approx. 4 lbs. for HI SP6, 3 lbs. HI
SP1.
| Capacity | Model# | |
| lbs* | kg | Load Sensor |
| 22 | 10 | HI SP6-10 |
| 44 | 20 | HI SP6-20 |
| 110 | 50 | HI SP6-50 |
| 220 | 100 | HI SP6-100 |
| 440 | 200 | HI SP6-200 |
| Capacity | Model# | |
| lbs* | kg | Load Sensor |
| 16.5 | 7.5 | HI SP1-7.5 |
| 22 | 10 | HI SP1-10 |
| 33 | 15 | HI SP1-15 |
| 66 | 30 | HI SP1-30 |
| 110 | 50 | HI SP1-50 |
| 165 | 75 | HI SP1-75 |
| 220 | 100 | HI SP1-100 |
| 440 | 200 | HI SP1-200 |
HI SP1 Single Point Outline
HI SP6 Single Point Outline
| HISP1 | HISP6 | |
| EXCITATION + | GREEN | RED |
| EXCITATION – | BLACK | BLACK |
| SIGNAL + | WHITE | GREEN |
| SIGNAL – | RED | WHITE |
| C2+ | GRAY | GRAY |
| C2 – | VIOLET | VIOLET |
| SHIELD | YELLOW | YELLOW |
WARNING: NEVER cut load sensor cable
CABLE LENGTH 9-10 FEET
Reviews
There are no reviews yet.