Description
HIHPLP – ADVANTAGE® Low Profile Load Point Systems (1,100 to 66,000 lbs)
The Hardy HI HPLP ADVANTAGE® Series are low-profile load point systems designed to support loads where a traditional load cell won’t fit. They are manufactured with electropolished surfaces, and stainless steel or alloy steel construction making them low-maintenance in less than ideal environments.
The load point provides users with a uniform, compact and economical solution across a wide range of load cell capacities – from 500 kg (1100 lbs.) through to 30,000 kg (66,000 lbs.). Each load point consists of mounting hardware and an mV/V and mV/V/ohm matched load sensor with true hermetic sealing, C2® Electronic Calibration capabilities, on-board electronic certs, and twenty feet of cable. Each load point assembly is specifically designed to eliminate the effects of unwanted side forces to provide exceptional accuracy and features IP68/IP69K.
| SPECIFICATIONS | |
| Rated Output (ES) | 2±0.1 mV/V |
| Non-Linearity | <±0.25 % R.O. |
| Hysteresis | <±0.25 % R.O. |
| Combined Error | <±0.25 % R.O. |
| Zero Balance | <±5.0 % R.O. |
| Creep @ 30 Min. | <±0.06 % R.O. |
| Temp Effect Output | <±0.04 % R.O./C |
| Temp Effect Sensitivity | <±0.02 % R.O./C |
| Input Resistance | 390 ± 20 ohm |
| Output Resistance | 330± 25 ohm |
| Insulation Resistance | ≥5000 Mohm |
| Excitation | 5 – 15 vdc |
| Safe Load Limit | 200 % Emax |
| Ultimate Load | 300 % Emax |
| EN 60 529 Protection | IP68*/IP69 |
| Operating Temperature | –20 to+65 °C |
| Stainless RA Rating | 0.5um nominal |
| Approvals | IP68/IP69K |
| Warranty | Two years |
* Up to 2m water depth
ORDERING INFORMATION
Load sensors are manufactured in Stainless Steel. Each load point consists of sensor and mount and is available with stainless steel (SS) or alloy steel (AS) mounting hardware.
| Capacity | Model # | Load Point | Load Point | |
| lbs* | mt | Sensor Only | Stainless Steel Mount | Alloy Steel Mount |
| 1.1K | .5 mt | HIHP50-SS-1.1K | HIHPLP-SS-1.1K | HIHPLP-AS-1.1K |
| 2.2K | 1 mt | HIHP50-SS-2.2K | HIHPLP-SS-2.2K | HIHPLP-AS-2.2K |
| 4.4K | 2 mt | HIHP50-SS-4.4K | HIHPLP-SS-4.4K | HIHPLP-AS-4.4K |
| 11K | 5 mt | HIHP50-SS-11K | HIHPLP-SS-11K | HIHPLP-AS-11K |
| 22K | 10 mt | HIHP50-SS-22K | HIHPLP-SS-22K | HIHPLP-AS-22K |
| 44K | 20 mt | HIHP50-SS-44K | HIHPLP-SS-44K | HIHPLP-AS-44K |
| 66K | 30 mt | HIHP50-SS-66K | HIHPLP-SS-66K | HIHPLP-AS-66K |
* lbs estimated from mt conversion
ADVANTAGE Low Profile Load Sensor
C2 WIRE COLOR CODE FLAG LABEL IS FOUND APPROX. 10 IN. FROM END OF SENSOR’S CABLE
| EXCITATION + | RED |
| EXCITATION – | BLACK |
| SIGNAL + | GREEN |
| SIGNAL – | WHITE |
| C2+ | GRAY |
| C2 – | VIOLET |
| SHIELD | YELLOW |
WARNING: NEVER cut load sensor cable
CABLE LENGTH: 20 FEET
ADVANTAGE Low Profile Load Point Outline
HI HPLP Load Points
Reviews
There are no reviews yet.