Shop

ETH / Rotating Torque Sensor DRVL

ETH / Rotating Torque Sensor DRVL

27 torque ranges from ± 0 – 0,02 Nm up to 20.000 Nm

  • Large input voltage range (10 – 28,8 V). 
  • Frequency output 10 kHz ± 5 kHz (RS422). 
  • Large speed range for speed- and angle measurements.
  • Adjustable output level for speed- and angle signal (5 – 24 V). 
  • Better electromagnetic compatibility (EMC). 
  • Optional 0,05% linearity error. 

Easy assembly attachment with “F” / base option
Accessories mounting adapter for easy attachment
Mounting adapters are available for this sensor!

Category:
Tag:
Brand:

Description

Rotating Torque Sensor DRVL

Series DRVL torque transducers are suitable for lab and industrial applications because of their small size and multiple mounting options. As supply voltage and output signal are transmitted without contact, the device can operate continuously with low wear and no maintenance. 
These transducers are also available with optional speed and angular measurement for a host of applications. The integrated signal amplifier is powered with 10 – 28,8 V DC and outputs an electrically isolated analog signals of 0 ± 10 V and 10 kHz ± 5 kHz.
The standard version has smooth shaft ends, several types are available with optional keyways

Supply voltage: 10 – 28,8 V DC  
Power consumption: at Ub 12 V approx. 180 mA (switching converter 2.2 W)
Rise time 10-90 %: 2 ms       (optional 400 μs)  
Limit frequency -3 dB: 200 Hz  (optional 1 kHz)  
Voltage output: Output frequency:
Output signal: 0 ± 10 V 10 kHz ± 5 kHz
Resolution: 16 bit ≙ 0,38 mV 16 bit ≙ 0,19 mHz
Max. output range: ± 11 V ± 6,3 KHz
Internal resistance: 100 Ω _
Ripple: < 100 mVpp _
Nonlinearity/max. measurement error (of full scale):
DRVL:                                                                                   0,15 % (optional 0,1 %)
DRVL-I to DRVL-VI:                                                              0,1 %                                                                                             (optional 0,05%) 		 
0,15 %  (optional 0,1 %)
0,1 %              (optional 0,05 %)
Error for Hysteresis: 0,1 % 0,1 %
Deviation at zero point: ≤ 50 mV ≤ 50 Hz
Operating temperature: 0 – 60 °C  
Compensated temperature range: 5 – 45 °C  
Temperature error Zero point: Sensitivity:  
0,02 % / K
0,01 % / K 		 
Mechanical overload: 100 %  
Internal protection: IP40  
Connection: 12pin-connector (circular connector series 680)
Interference emission
Basic standard
EN55011        Limit class B 		 
Frequency range 150 kHz – 6 GHz 		 
Immunity to interference
Basic standard
EN61000-4-2:2009 Electrostatic discharge (ESD)
EN61000-4-2:2009 Electrostatic discharge (ESD)
EN61000-4-3:2009 Electromagnetic fields
EN61000-4-4:2009 Bursts
EN61000-4-5:2005 Surge voltages
EN61000-4-6:2009 Conductor-borne RF disturbances
EN61000-4-8:2005 Power frequency magnetic fields

Testing accuracy coupling Result
4 kV direct A
4 kV indirect A
10 V/m indirect A
2 kV indirect A
1 kV direct B
10 V/m indirect A
30 A/m indirect A

 

A: Deviation of outputs during the test < 0.3 % of full scale
B: Deviation of outputs during the test > 0.3 % of full scale
  Rpm option (n) Angle option (w)
Max rpm: 37.000 min-1 * depending on size 20.000 min-1 *
Output: TTL or over voltage on pin 5 V < U < 24 V
Impedance: 22 Ω 22 Ω
Imax: 20 mA 20 mA
Pulses/rev.: 60 2 x 360
Resolution: — 1°
Phase shift: — Channel A 90° at right spin of propulsion side
* The values are valid for ETH test cables ≤ 10 m, the maximum permissible rpm of the sensor must be observed.

Type DRVL DRVL-I DRVL-Ib DRVL-II DRVL-III DRVL-IV DRVL-V DRVL-VI
Torque 0,02 0,05 2 1 5 50 500 2000 10.000
ranges: 0,05 0,1   2 10 100 1000 3000 15.000
(± 0 – … ) 0,10 0,2   5 20 150 1300 4000 20.000
[Nm]   0,5   10 30 200 1500 5000  
    1     50 300      
Dimensions: [mm]   (Other ranges upon request; General tolerances DIN 2768-m)  
L1 82 89 95 110 145 170 270 320 355
L2 7,5 11 14 18 30 45 85 110 115
L3 7,5 10 14 18 30 45 85 110 115
L4 67 66 72 83 78 90 — —
L5 63 62 68 79 72 84 95 121
B1 32 28 36 42 56 88 105 168
H1 47 54 58 58 73 104 121 185
H2 ± 0,05 14 14 18 21 28 44 52,5 84
D1 g6 3 8 8 10 15 26 45 70 110
D2 g6 3 5 6 10 15 26 45 70 110
D3 -0,1 15 27 32 38 54 80 — —
D4 ± 0,1 (→ A1&A2) 32 38 46 65 98 — —
A1 ± 0,1 24 (→ D4) (→ D4) (→ D4) (→ D4) (→ D4) (→ D4) —
A2 ± 0,1 22 (→ D4) (→ D4) (→ D4) (→ D4) (→ D4) (→ D4) —
A3 50 40 56 60 42 46 75 91
A4 24 22 24 32 40 70 85 138
G1 M2,5 x 5 M3 x 5 M3 x 6 M3 x 6 M4 x 8 M6 x 12 M8 x 16 M10 x 16
G2 both sides M2,5 x 5 M3 x 6 M3 x 6 M3 x 6 M4 x 8 M6 x 12 — —
P (DIN 6885)
optional 		— — 2x A3x3x14 2x A5x5x25 2x A8x7x40 4x A14x9x80 4x
A20x12x100 		—
Weight aprox. [g] 200 170 340 600 1300 4500 11.500 33.000

Type DRVL-F DRVL-I-F DRVL-Ib-F DRVL-II-F DRVL-III-F DRVL-IV-F DRVL-V-F DRVL-VI-F
Torque ranges: (± 0 – … ) [Nm] 0,02
0,05
0,10 		0,05
0,1
0,2
0,5
1 		2 1
2
5
10 		5
10
20
30
50 		50
100
150
200
300 		500
1000
1300
1500 		2000
3000
4000
5000 		10.000
15.000
20.000
Dimensions: [mm]                          (Other ranges upon request; General tolerances DIN 2768-m)
L1 82 89 95 110 145 170 270 320 355
L2 7,5 11 14 18 30 45 85 110 115
L3 7,5 10 14 18 30 45 85 110 115
L4 63 62 68 79 72 84 95 121
L5 67 66 72 83 78 90 — —
B1 56 60 78 78 98 158 208 298
B2 32 28 36 42 56 88 105 168
H1 78 85 85 82 90 172 228,5 316
H2 ± 0,05 45 45 45 45 45 112 160 215
H3 12 12 15 15 15 20 30 40
D1 g6 3 8 8 10 15 26 45 70 110
D2 g6 3 5 6 10 15 26 45 70 110
D3 -0,1 15 27 32 38 54 80 — —
D4 ± 0,1 (→ A1&A2) 32 38 45 65 98 — —
A1 24 (→ D4) (→ D4) (→ D4) (→ D4) (→ D4) — —
A2 22 (→ D4) (→ D4) (→ D4) (→ D4) (→ D4) — —
A3 ± 0,1 50 50 50 65 55 65 70 90
A4 ± 0,1 44 44 58 58 76 124 156 233
A5 ± 0,02 44 44 58 58 76 124 156 233
G1 both sides M2,5 x 5 M3 x 6 M3 x 6 M3 x 6 M4 x 8 M6 x 12 — —
S1 5,5 5,5 6,6 6,6 9 11 13 17
Z1 E8 4 4 5 5 6 8 10 12
N1 H8 6 6 8 8 10 10 10 10
N2 +0,2 2,8 2,8 3,3 3,3 3,3 3,3 3,3 3,3
N3 +0,3 50 50 60 60 60 60 80 100
P (DIN 6885)
optional 		— — 2x A3x3x14 2x A5x5x25 2x A8x7x40 4x A14x9x80 4x
A20x12x100 		—
Weight approx.[ g] 400 400 600 900 1600 6600 15.000 43.000

Type M-DRVL M-DRVL-I M-DRVL-Ib M-DRVL-II M-DRVL-III M-DRVL-IV M-DRVL-V M-DRVL-VI
Design X Y X Y X Y X Y X Y X Y X Y X Y
SH 23…55 ≥56 25…60 ≥61 29…65 ≥66 32…67 ≥68 41…84 ≥85 67…119 ≥120 93…154 ≥155 152…211 ≥212
Dimensions: [mm]
L1 63 62 68 79 72 84 95 121
B1 56 60 78 78 98 158 208 298
H1 = SH – 14 = SH – 14 = SH – 18 = SH – 21 = SH – 28 = SH – 44 = SH – 52,5 = SH – 84
H2 8 10 10 10 12 15 25 35 32
A1 24 22 24 32 40 70 85 138
A2 50 40 56 60 42 46 75 91
A3 44 44 58 58 76 124 156 233
A4 50 50 50 65 55 65 70 90
S1 2,9 3,4 3,4 3,4 4,5 6,6 9 11
S2 6,5 — 6,5 — 6,5 — 6,5 — 8,5 — 11,5 — 15,5 — 18,5 —
S3 5,5 5,5 6,6 6,6 9 11 13 17
Z1 E8 4 4 5 5 6 8 10 12
N1 H8 6 6 8 8 10 10 10 10
N2 +0,2 2,8 2,8 3,3 3,3 3,3 3,3 3,3 3,3
N3 +0,3 50 50 60 60 60 60 80 100
Weight
approx. [g] 		80…330 ≥230 110…380 ≥220 150…430 ≥350 180…660 ≥420 230…850 ≥500 740…2200 ≥1300 1900…4100 ≥2800 5700…9900 ≥6800

Ordering code: M-[Sensor-type]-SH[peak height in mm] → Example: M-DRVL-II-SH65

 
Type 		Torque range
(0 – …)
[Nm] 		Max. rpm
[min -1] 		Spring constant
[Nm/rad] 		Mass moment of inertia [g x cm²] Max.
axial load
[N] 		Max.
radial load
[N]
Total Drive side Measuring side
 
DRVL 		0,02 20.000 8 7 7 0,1 35 30
0,05 20.000 8 7 7 0,1 35 30
0,10 20.000 8 7 7 0,1 35 30
 
 
DRVL-I 		0,05 37.000 25 10 10 0,2 105 2
0,1 37.000 40 10 10 0,2 140 3
0,2 37.000 40 10 10 0,2 140 3
0,5 37.000 80 10 10 0,3 160 4
1 37.000 80 10 10 0,3 210 7
2 37.000 213 10 10 0,4 210 13
 
DRVL-Ib 		1 26.000 250 29 24 5,5 630 10
2 26.000 250 29 24 5,5 630 10
5 26.000 710 29 24 5,6 725 25
10 26.000 1319 30 24 5,9 725 50
 
 
DRVL-II 		5 19.000 955 98 65 32 1200 15
10 19.000 2115 98 66 32 1300 30
20 19.000 3955 99 66 32 1300 60
30 19.000 5335 100 67 33 1300 100
50 19.000 6700 103 68 34 1300 155
 
 
DRVL-III 		50 13.500 17.000 774 428 346 1800 125
100 13.500 30.000 782 432 350 1800 215
150 13.500 44.000 796 439 357 1800 340
200 13.500 54.000 809 446 364 1800 450
300 13.500 66.000 837 459 377 1800 650
 
DRVL-IV 		500 7900 259.000 9930 5290 4640 4150 650
1000 7900 387.000 10.140 5395 4745 4150 1275
1300 7900 429.000 10.280 5465 4815 4150 1650
1500 7900 449.000 10.380 5515 4865 4150 1650
 
DRVL-V 		2000 6300 1.430.000 62.905 32.560 30.345 4800 1950
3000 6300 1.820.000 63.505 32.860 30.645 4800 2930
4000 6300 2.090.000 64.225 33.220 31.005 4800 3880
5000 6300 2.270.000 65.005 33.610 31.395 4800 4000
 
DRVL-VI 		10.000 4000 8.200.000 434.720 221.570 213.150 11.800 8000
15.000 4000 10.440.000 442.430 225.430 217.000 11.800 8000
20.000 4000 11.800.000 450.880 229.650 221.230 11.800 8000

Ordering code

Available accessories
  • ETH-Measurement cable
  • Display and evaluation devices
  • Couplings

Reviews

There are no reviews yet.

Be the first to review “ETH / Rotating Torque Sensor DRVL”

Related products