Description
MSBLC Miniature S-Beam Overload Protection Load Cell
Key features
- Bi-directional
- ±0.05% (full scale) non-linearity
- Overload protection in both tension and compression directions
About the MSBLC Miniature S-Beam Overload Protection Load Cell
The Miniature S-Beam Load Cell is a bi-directional Aluminium strain gauge based transducer with high performance and built-in temperature compensation. This design provides better than ±0.05% (full scale) non-linearity and includes overload protection in both tension and compression directions.
Wiring
Cable Version
The S-beam load cell is provided with 4×28 AWG wiring within a braided shielded cable (overall cable length 2m)
Lemo Version
Connector pin configuration as shown in the datasheet (for the with-connector version)
Technical Specifications
| Specification | Value |
|---|---|
| Rated Capacity (lbf) | 25, 50, 100 & 250 |
| Rated Output (RO) (mV/V) | 2 nominal |
| Overload (%) | 1000 of RO |
| No Load Offset (%) | ±1 of RO |
| Excitation (VDC or VAC) (V) | 5, 10 |
| Input Impedance | 1000 Ω nominal |
| Output Impedance | 1000 Ω nominal |
| Non-Linearity (%) | ±0.05 of RO |
| Hysteresis (%) | ±0.05 of RO |
| Non-Repeatability (%) | ±0.05 of RO |
Reviews
There are no reviews yet.