Description
01324 Rotating Torque Sensor
Key features
- Capacity: 0,35 / 0,71 / 1,41 / 3,53 / 7,06 / 12 / 23 / 56 / 113 / 226 / 565 / 1.130 / 1.700 / 2.260 Nm
- -53 to +121 °C (-65 to +250 °F) Operating temperature range
- Maximum shaft speed 5.000 rpm
-
Non-linearity/ Hysteresis 0.10% of FS/0.10% of FS
About the 01324 Rotating Torque Sensor
These sensors are designed to measure rotating drive torque using a conventional shaft-to-shaft configuration for in-line placement. The design incorporates a coin silver slip ring assembly that transmits excitation voltage to, and output signals from, the rotating sensor. These sensors can be supplied with Auto-ID, which eliminates scaling when used with the PTI or PMAC 2000 instruments. An optical encoder to measure angle or speed is also available with this model.
Available options for 01324:
- 4 pin Bendix connector (non Auto-ID)
- 10 pin Bendix connector (Auto-ID)
- Integrated signal amplifier (+/-5V or +/-10V, 4-20mA)
- Integral optical encoder – 1024 ppr and 1500 ppr (requires 10 pin connector)
- Foot-mount
Technical Specifications
| Specification | Value |
|---|---|
| Bridge resistance | 1000 Ω |
| Capacity | 0.35 / 0.71 / 1.41 / 3.53 / 7.06 / 12 / 23 / 56 / 113 / 226 / 565 / 1130 / 1700 / 2260 Nm |
| Compensated temperature range | +21 to +76 °C (+70 to +170 °F) |
| Hysteresis | 0.10 % of FS |
| Maximum shaft speed | 5000 rpm |
| Non-linearity | 0.10 % of FS |
| Operating temperature range | -53 to +121 °C (-65 to +250 °F) |
| Output at fs | 2.0 mV/V nominal |
| Overload capacity | 150 % of FS |
| Supply voltage | 20 VDC |
| Temperature effect on span | 0.002 % of reading/°F (0.004 % of reading/K) |
| Temperature effect on zero | 0.002 % of FS/°F (0.004 % of FS/K) |
| Zero balance | 1.00 % of FS |
Reviews
There are no reviews yet.