Description
HIHLPT – ADVANTAGE® Low to Mid Range Tension Load Point (225 lbs to 11,250 lbs)
The Hardy HI HLPT ADVANTAGE® Series, tension load cells are designed for use on low to medium capacity vessels. Each tension load cell consists of mounting hardware and a stainless steel mV/V and mV/V/ohm matched load sensor with true hermetic sealing, C2® Electronic Calibration capabilities, onboard electronic certs, a ¼ NPT conduit adapter, and twenty feet of cable.
Each tension load cell assembly is specifically designed to eliminate the effects of unwanted forces to provide exceptional accuracy. A grounding strap and fixed color code wiring label are provided with each load point. The mounting hardware is available in either stainless or zinc plated steel for capacities up to 4.5K pounds and galvanized steel in higher capacities. The load sensors have an IP rating of IP68/IP69K.
The HI HLPT is available in the following standard capacities: 225 lbs, 450 lbs, 1,125 lbs, 2.25K lbs, 4.5K lbs, and 11.25K lbs.
| SPECIFICATIONS | HISTH06 | HISTH01 |
| Rated Capacity | 225/450/1125 lbs | 2250/4500/11250 lbs |
| Rated Output (ES) | 2±0.002mV/V | 2±0.002mV/V |
| Max # Verification Int. | 3000 | 3000 |
| Min Verification Int. | Emax/10200 | Emax/12000 |
| Non-Linearity | <±0.0166 % R.O. | <±0.0166 % R.O. |
| Hysteresis | <±0.0166 % R.O. | <±0.0166 % R.O. |
| Zero Balance | <±5% R.O. | <±5% R.O. |
| Combined Error | <±0.02 % R.O. | <±0.02 % R.O. |
| Creep @ 30 Min. | <±0.0166 % R.O. | <±0.0166% R.O. |
| Temp Effect Output | <±0.0137 % R.O./C | <±0.0246% R.O./C |
| Temp Effect Sensitivity | <±0.010 % R.O./C | <±0.010 % R.O./C |
| Input Resistance | 1100± 50 ohm | 1100 ± 50 ohm |
| Output Resistance | 1000 ± 2 ohm | 1000 ±2 ohm |
| Insulation Resistance | ≥5000 Mohm | ≥5000 Mohm |
| Excitation | 5 – 15 vdc | 5 – 15 vdc |
| Compensated Temp | °C –10 to+40 | °C –10 to+40 |
| Operating Temperature | °C –20 to+80 | °C –20 to+80 |
| Safe Load Limit | 200 % Emax | 200 % Emax |
| Ultimate Load | 300 % Emax | 300 % Emax |
| Construction | Stainless Steel 17-4PH | Stainless Steel 17-4PH |
| Sealing | Hermetically Sealed | Hermetically Sealed |
| Approvals | IP68/IP69K FM IS Class I, Div 1 |
IP68/IP69K FM IS Class I, Div 1 |
| Warranty | Two years | Two years |
ORDERING INFORMATION
Load Point can be ordererd with stainless hardware (-43C) as shown, or zinc plated hardware (-45C). Note: 11.25K available in Zinc Plated Only.
Shipping weight for load points approx. 10-35 lbs, Sensor 4 lbs
| Capacity | Model # | Model# | |
| lbs | mt | FIXED Assy | SPARE Load Sensor |
| 225 | 0.1 | HI HLPT225-43C | HI STH06-225 |
| 450 | 0.2 | HI HLPT450-43C | HI STH06-450 |
| 1,125 | 0.5 | HI HLPT1125-43C | HI STH06-1125 |
| 2.25K | 1 | HI HLPT2.25K-43C | HI STH01-2.25K |
| 4.5K | 2 | HI HLPT4.5K-43C | HI STH01-4.5K |
| 11.25K | 5 | HI HLPT11.25K-45C | HI STH01-11.25K |
ADVANTAGE Load Point Outline
HI HLPT Series
DIMENSIONS- INCHES & [mm]
| SENSOR TYPE | CAPACITY LBS [kN] | A | B | C | D |
| HI STH06 |
225 [1] |
2.42 [61.5] |
9.13 [232.0] |
.500-13 UNC |
1.38 [35.0] |
| 450 [2] |
|||||
| 1125 [5] |
|||||
| HI STH01 |
2.25K [10] | 3.62 [92.0] |
11.02 [280.0] |
.625-11 UNC |
1.77 [45.0] |
| 4.5K [20] | |||||
| 11.25K [50] | 5.35 [136.0] |
14.96 [380.0] |
1.000-8 UNC |
2.36 [60.0] |
C2 WIRE COLOR CODE FLAG LABEL IS FOUND
APPROX. 10 IN. FROM END OF SENSOR’S CABLE
| EXCITATION + | RED |
| EXCITATION – | BLACK |
| SIGNAL + | GREEN |
| SIGNAL – | WHITE |
| C2+ | GRAY |
| C2 – | VIOLET |
| SHIELD | YELLOW |
WARNING: NEVER cut load sensor cable
CABLE LENGTH: 20 FEET
HI STH06 & HI STH01 Load Sensor Outline
HI STH01 Series
HI STH06 Series
DIMENSIONS- INCHES & [mm]
| CAPACITY LBS [kN] | H1 | H2 | L1 | L2 | W1 | D1 THREAD |
| 225, 450, 1125 | 2.42 | 1.21 | 2.42 | 1.21 | 1.18 | .500-20 UNF |
| [1] [2] [5] | [61.5] | [30.7] | [61.5] | [30.7] | [30.0] | |
| 2.25K, 4.5K | 3.62 | 1.81 | 3.38 | 1.69 | 1.18 | .625-18 UNF |
| [10] [20] | [92.0] | [46.0] | [86.0] | [43.0] | [30.0] | |
| 11.25K | 5.35 | 2.86 | 5.62 | 2.81 | 1.69 | 1-12 UNF |
| [50] | [136.0] | [68.0] | [143.0] | [71.5] | [43.0] |
TOLERANCES: ±0.015 [0.4] UNLESS OTHERWISE STATED
Reviews
There are no reviews yet.