설명

AILC2 in line loadcell

Key features

• Threaded miniature design for easy inline installation
• Measures forces up to 5000 N / 1000 lbf
• ±0.25 % non-linearity
• Nominal output: 2 mV/V
• IP64 environmental protection
• Braided cable with strain relief included

Performance highlights AILC2 in line loadcell

The AILC2 is a highly compact, threaded in-line load cell ideal for measuring both tensile and compressive forces in applications with limited space. With capacities up to 5000 N (or 1000 lbf) and non-linearity better than ±0.25%, this sensor is suited for accurate, repeatable results under demanding conditions.

Usage conditions

The sensor operates reliably between -20 °C and +80 °C and offers IP64 protection. Its integrated stainless-steel spring provides mechanical strain relief for the cable connection. The sensor comes with a 1.5 m braided shielded cable and is optionally available with a connector.

Possible applications

• Inline force measurement in test benches
• Actuator and press force feedback
• Small component mechanical testing
• Robotic gripper force monitoring
• Embedded measurement in tooling systems
• Packaging or automation systems with limited space

Advantages of choosing this product

Thanks to its compact design, the AILC2 is well-suited for space-constrained environments. The robust construction with stainless steel strain relief and precise calibration allows engineers to integrate it easily into high-performance systems.

Other important features

• Very low nominal deflection (0.05 mm / 0.10 mm)
• Versions in both metric and imperial capacities
• Optional connector pinout available
• High bridge resistance: 700 Ω
• Compatible with 5 V or 10 V excitation

Technical Specifications

Specification	Value
Capacity	200N, 500N, 1000N, 2000N & 5000N, 50lbf, 100lbf, 250lbf, 500lbf, 1000lbf
Rated Output (RO) (mV/V)	2 nominal
Allowable Maximum Load (%)	150 full scale
Non-Linearity (%)	±0.25 of RO max.
Hysteresis (%)	±0.25 of RO max.
Repeatability (%)	±0.1 of RO max.

WIRING

• The sensor is provided with a #32 AWG 4-conductor braided shielded cable with an outer jacket of 0.087” [2.2 mm] diameter, 5 ft [1.5m] long, with no connection between the shield and the sensor body. For additional protection, the cable is contained within a stainless steel spring for strain relief purposes for the first 1” [25 mm].
• Connector pin configuration as shown below (for the with-connector version)

 

DIMENSIONS