설명
01424 Rotating Torque Sensor
Key features
- Capacity: 0,35 / 0,71 / 1,41 / 3,53 / 7,06 / 12 / 23 / 56 / 113 / 226 / 565 / 1.130 / 1.700 / 2.260 Nm
- Max shaft speed 10.000 rpm
- Non-linearity 0.1 % F.S.
- Output signal ±5 V
- Supply voltage 12 – 15 VDC
About the 01424 Rotating Torque Sensor
These sensors are designed to measure rotating drive torque using a conventional shaft-to-shaft configuration for in-line placement. The unique design incorporates a digital non-contact wireless system that provides power to the rotating electronics mounted on the shaft and transmits the signal back to the receiver in digital format. The torque signal is then represented as a calibrated high level analog voltage. The sensor features high rotational speed, high frequency response, and high accuracy. These sensors can also be supplied with an optical encoder to measure angle or speed.
Available options 01424:
- Signal amplifier output = ±10 V FS
- Integral optical encoder – 512 ppr (10000 rpm)
- Integral optical encoder – 1024 ppr (5800 rpm)
- Foot mount
Technical Specifications
| Specification | Value |
|---|---|
| Bandwidth | DC … 1 kHz |
| Capacity | 0.35 / 0.71 / 1.41 / 3.53 / 7.06 / 12 / 23 / 56 / 113 / 226 / 565 / 1130 / 1700 / 2260 Nm |
| Compensated temperature range | +21 to +76 °C (+70 to +170 °F) |
| Hysteresis | 0.10 % of FS |
| Maximum shaft speed | 10000 rpm for 2000 in-lbs and less; 7500 rpms for larger capacities |
| Non-linearity | 0.10 % of FS |
| Operating temperature range | -40 – 85 °C (-40 – +185 °F) |
| Output at fs | ±5 VDC isolated |
| Overload capacity | 150 % of FS |
| Sample rate | 20000 samples per second |
| Supply current, max. | 350 mA |
| Supply voltage | 12 – 15 VDC |
| Temperature effect on span | 0.002 % of reading/°F (0.004 % of reading/K) |
| Temperature effect on zero | 0.002 % of FS/°F (0.004 % of FS/K) |
| Zero balance | 1.0 % of FS |
상품평
아직 상품평이 없습니다.