설명
ATF315 Miniature Reaction Torque Sensor
Key features
- Measurement ranges 0 – 10 mNm to 0 – 5 Nm
- Non-linearity 0.05 % RT
- Output signal 0.2 – 1 mV/V
- Supply voltage 10 VDC
- -10 – +80 °C Operating temperature
- Repeatability: ±0.05% RT
- Hysteresis: ±0.1% RT
About the ATF315 Miniature Reaction Torque Sensor
This static torque transducer is used extensively in instrumentation and small electric motor test and calibration applications.
Torque transmission must be arranged to input only torque as extraneous forces, such as tare loads or axial loads will cause measurement errors. Note we are able to calibrate with extraneous load cases replicated. The highly symmetrical signal outputs are usually between 0.2 and 1mV/V for full range.
We are happy to design variants of this transducer to meet your specific requirements. Please consult our engineering department. If you require a higher torque range than 5 Nm the ALF311 is available with ranges up to 1.000 Nm.
Technical Specifications
| Specification | Value |
|---|---|
| Bridge resistance | 700 Ohm |
| Compensated temperature range | -10 – +50 °C |
| Creep, 20 min | ±0.3 % AT |
| Hysteresis | ±0.1 % RT |
| Insulation resistance, minimum at 50 vdc | 500 MOhm |
| Material | Aluminium |
| Non-linearity, terminal | ±0.05 % RT |
| Operating temperature range | -10 – +80 °C |
| Overload, safe | 125 % RT |
| Overload, ultimate | 150 % RT |
| Rated output, nominal | 0.2 to 1 mV/V (range dependant) |
| Rated torque | 10 mNm to 5 Nm |
| Repeatability | ±0.05 % RT |
| Supply voltage, max. | 15 V |
| Supply voltage, recommended | 10 V |
| Temperature effect on rated output | ±0.005 % AT/K |
| Temperature effect on zero load output (1 mv/v) | ±0.01 % RT/K |
| Weight (excl. cable) | approx. 110 to 130 g |
| Zero load output: | ±4 % RT |
상품평
아직 상품평이 없습니다.