설명
Fatigue Rated Torque Sensor Model M211-116
Product Details
The M211-116 was designed for use in material testing machines. The torque/thrust sensor provides a
small package size, a fully fatigue rated structure with low inertial mass and high stiffness, low crosstalk
between the torque and thrust measurements and resistance to the negative effects of extraneous forces in both measurement axes. The M211-116 can be used with AC carrier and DC strain gage signal
conditioning electronics. Interconnecting cable assemblies are available as an option. SensorData will
provide in-house calibration of the M211-114 with customer-supplied electronics for a fee. The M211-
116 is available in non-standard rated capacities on a special order basis; please contact SensorData with your torque/thrust measurement requirements.
| Item | Specification |
|---|---|
| Note | Specifications subject to change without notice |
| Rated Fatigue Capacity | 1K lb-in torque & 5K lbs thrust 1K lb-in torque & 2K lbs thrust 100 lb-in torque & 200 lbs thrust |
| Nonlinearity | 0.15% of rated output, both axes |
| Hysteresis | 0.15% of rated output, both axes |
| Nonrepeatability | 0.05% of rated output, both axes |
| Rated Output (Typical) | 2 mV/V, both axes |
| Zero Balance | ±1% of rated output, both axes |
| Operating Temperature Range | -65 to +200 °F, both axes |
| Compensated Temperature Range | +70 to +170 °F, both axes |
| Temperature Effect on Output | 0.002% of load/°F, both axes |
| Temperature Effect on Zero | 0.002% of rated output/°F, both axes |
| Input Impedance (Minimum) | 750 ohms, both axes |
| Output Impedance | 700 ±5 ohms, both axes |
| Excitation Voltage (Typical) | 10 VDC or VAC rms, both axes |
| Excitation Voltage (Maximum) | 20 VDC or VAC rms, both axes |
| Insulation Resistance | > 5000 megohms at 50 VDC, both axes |
| Maximum Load (Safe) | 150% of rated capacity, both axes |
| Maximum Load (Ultimate) | 300% of rated capacity, both axes |
| Deflection at Rated Capacity (Typical) | 0.002 in, both axes |
| Crosstalk | < 2%, both axes |
| Fatigue Rating | 10⁸ cycles (full fatigue capacity tension to full fatigue capacity compression load) |
| Number of Bridges | 2 |
| Weight | 4 lb |
| Construction | SAE 4340 alloy steel with satin nickel finish |
상품평
아직 상품평이 없습니다.