설명
Transmitter for transformer method torque transducer CSA-561C
| Specification name | Specification contents |
|---|---|
| Bridge power supply | AC2.0 Vrms sine wave 5 kHz±0.1 kHz |
| Applicable transducer | Strain gage based torque transducer |
| Input range | 0.5 mV/V ~ 3 mV/V (1 mV/V = 2 000 μst) |
| Output | ±10 V output (±0.5 mV/V input, at bridge power supply AC2.0 Vrms) |
| Load resistance | Resistance load 2kΩ or more, Output capacitance load 0.1 uF or less |
| Sensitivity adjustable range | ±2.5 mV/V Coarse adjustment Automatic balance Fine adjustment Zero adjustment trimmer Resistance section Approx.1 %(±2.5 mV/V) Capacitance section Up to 2 000 pF is possible Automatic balancing time Approx.1 s， Accuracy ±0.2 %F.S.， Back-up time : 24 h or more |
| Non-linearity (Display and voltage output) |
0.05 %F.S. |
| Temperature efficient | Zero point ±0.1 μV/℃ (Input conversion) Sensitivity within ±0.05 %F.S./℃ |
| CALIB | Set by digital switch Setting range : 0 ~ ±9 999 μst., Accuracy : ±0.5 % |
| Frequency response range | DC ~ 2 kHz (Filter: W/B) (Changeable to 1 Hz, 10 Hz, 100 Hz, 300 Hz, 1 kHz or W/B) |
| Display section | Output voltage display 0 ~ ±10.000 Digital display (Green LED) Sampling rate: Approx. 4 times/s |
| ERROR function | (+10 V or more or-10 V or less), the display flashes 0.000 or -0.000on and off and also ERROR will be shown. (Photocoupleroutput) |
| Remote function | Automatic balance ±CALIB |
| LOCK function | Automatic balance, Prohibit the operation of ± CALIB (Including ±CALIB of automatic balance for remotefunction) |
| Operating temp. / humidity range | Temperature -10 ℃~ 50 ℃ Humidity 85 %RH or less (Non condensing) |
| Power supply | 100 VAC±10 VAC 50/60 Hz |
| Power consumption | Approx. 10 VA (at 100 VAC) |
| Outline dimensions (WxHxD) | 42 mm x 176 mm x 284.4mm (Excludes protruding parts.) |
| Weight | Approx. 1.5 kg |
Outline dimensions
상품평
아직 상품평이 없습니다.