HARDY / HI HPLP Low Profile Load Points

브랜드: HARDY

설명

HIHPLP – ADVANTAGE® Low Profile Load Point Systems (1,100 to 66,000 lbs)

The Hardy HI HPLP ADVANTAGE® Series are low-profile load point systems designed to support loads where a traditional load cell won’t fit. They are manufactured with electropolished surfaces, and stainless steel or alloy steel construction making them low-maintenance in less than ideal environments.
The load point provides users with a uniform, compact and economical solution across a wide range of load cell capacities – from 500 kg (1100 lbs.) through to 30,000 kg (66,000 lbs.). Each load point consists of mounting hardware and an mV/V and mV/V/ohm matched load sensor with true hermetic sealing, C2® Electronic Calibration capabilities, on-board electronic certs, and twenty feet of cable. Each load point assembly is specifically designed to eliminate the effects of unwanted side forces to provide exceptional accuracy and features IP68/IP69K.

SPECIFICATIONS
Rated Output (ES)	2±0.1 mV/V
Non-Linearity	<±0.25 % R.O.
Hysteresis	<±0.25 % R.O.
Combined Error	<±0.25 % R.O.
Zero Balance	<±5.0 % R.O.
Creep @ 30 Min.	<±0.06 % R.O.
Temp Effect Output	<±0.04 % R.O./C
Temp Effect Sensitivity	<±0.02 % R.O./C
Input Resistance	390 ± 20 ohm
Output Resistance	330± 25 ohm
Insulation Resistance	≥5000 Mohm
Excitation	5 – 15 vdc
Safe Load Limit	200 % Emax
Ultimate Load	300 % Emax
EN 60 529 Protection	IP68*/IP69
Operating Temperature	–20 to+65 °C
Stainless RA Rating	0.5um nominal
Approvals	IP68/IP69K
Warranty	Two years

* Up to 2m water depth
ORDERING INFORMATION
Load sensors are manufactured in Stainless Steel. Each load point consists of sensor and mount and is available with stainless steel (SS) or alloy steel (AS) mounting hardware.

Capacity		Model #	Load Point	Load Point
lbs*	mt	Sensor Only	Stainless Steel Mount	Alloy Steel Mount
1.1K	.5 mt	HIHP50-SS-1.1K	HIHPLP-SS-1.1K	HIHPLP-AS-1.1K
2.2K	1 mt	HIHP50-SS-2.2K	HIHPLP-SS-2.2K	HIHPLP-AS-2.2K
4.4K	2 mt	HIHP50-SS-4.4K	HIHPLP-SS-4.4K	HIHPLP-AS-4.4K
11K	5 mt	HIHP50-SS-11K	HIHPLP-SS-11K	HIHPLP-AS-11K
22K	10 mt	HIHP50-SS-22K	HIHPLP-SS-22K	HIHPLP-AS-22K
44K	20 mt	HIHP50-SS-44K	HIHPLP-SS-44K	HIHPLP-AS-44K
66K	30 mt	HIHP50-SS-66K	HIHPLP-SS-66K	HIHPLP-AS-66K

* lbs estimated from mt conversion
ADVANTAGE Low Profile Load Sensor

C2 WIRE COLOR CODE FLAG LABEL IS FOUND APPROX. 10 IN. FROM END OF SENSOR’S CABLE