설명
SS 30410 Load Cell
DESCRIPTION:
Model SS 30410, a rectangular stainless steel shear link beam, is a versatile and low cost load cell for link loading. The moveable linkage helps reduce excessive side loads and reading errors. Its stainless steel construction makes the cell durable for use in Livestock and tank scales. The cell is environmentally protected with water resistant seal and stainless steel plates to assure resistance against corrosion. The load cell is supplied with an integral 20 foot cable
- 1K to 10K pounds capacities
- Flexible link – loading design
- Complete environmental protection
- Exceed NIST H-44 requirements
- Stainless Steel
- Low cost
- Factory Mutual (F.M.) Approved
- Mounting hardware available
SPECIFICATIONS:
| Standard Capacities (lbs.) | 1K, 2K, 2.5K, 4K, 5K, 5KLE, 10K |
|---|---|
| Excitation Voltage | 10VDC – Maximum 15VDC |
| Rated Output | 3.0 mv/v ± 0.25% |
| Non-Linearity | < 0.03% FSO (Full Scale Output) |
| Hysteresis | < 0.02% FSO |
| Non-Repeatability | < 0.01% FSO |
| Zero Balance | ± 1.0% FSO |
| Bridge Resistance | 350 ohms ±3.5 ohms |
| Safe Overload | 150% of Rated Capacity |
| Temperature – Compensated Range | 0 – 150 deg. F |
| Temperature – Effect of Output | < 0.0008% FSO/deg. F |
| Temperature – Effect on Zero | < 0.0011% FSO/deg. F |
| Material/Finish | Stainless Steel |
DIMENSIONS:
| CAPACITY (Lbs.) | A | B | C | D | E | F | G | H | I | J | K |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1K-5K | 5.12 | 1.25 | 1.25 | 0.53 | 0.6 | 1 | 3 | 0.55 | 1 | 0.44 | 0.7 |
| 5KLE-10K | 6.75 | 1.5 | 1.5 | 0.78 | 0.75 | 1.5 | 3.75 | 0.85 | 1.2 | 0.56 | 0.9 |
APPLICATIONS:
- Livestock scales
- Tank and hopper weighing
상품평
아직 상품평이 없습니다.