설명
TD175e torque sensor
- type: torque sensor
- nominal torque: 10 Nm
- accuracy class: 0.1
- dimensions: Ø 175 mm x 98 mm
- internal pitch circle: 149 mm
- internal bore: 108 mm
- with integrated measuring amplifier GSV-1A 010/250/2 / M12, mounted on the TD175 torque sensor
- analog output -10V … + 10V
- connection: M12 connector, mating connector with 5 m cable SAC-5P- 5,0-PUR / M12FS SH
- material: aluminum alloy
incl. factory calibration certificate “System-calibration-5”:
- calibration of the measuring chain (torque sensor + measuring amplifier)
- 3 measuring series with 5 measuring points each
- measurement of the span, the relative characteristic deviation and the relative linearity deviation
- measurement of the insulation resistance, the sensor characteristic value, the zero deviation of the sensor
- measurement of the zero point return error
- proof of traceability to DAkkS
- torque device
- place a calibration mark on the device
- right torque: 0% -25% -50% -75% -100% -0%
- left torque: 0% -25% -50% -75% -100% -0%
- measurement of the sensor characteristic value in mV/V and the characteristic value of the measuring chain
- adjustment of display
Highlights
- with integrated measuring amplifier GSV-1A 010/250/2/M12
- Due to the arrangement of the measuring spokes, bending moments of up to 200 Nm can be absorbed
Product description
The torque sensor TD175 is used in test benches for measuring the reaction torque. (Wired, non-rotating).
The torque sensor consists of two flanges, which are connected with each other via 4 measuring spokes. The two flanges have the same pitch circle Æ 149mm. The centerings are designed as an external and internal collar with Ø114,3.
Due to the large diameter of the torque sensor TD175 and the arrangement of the measuring spokes in the axial direction, this torque sensor can also absorb bending moments up to 200 Nm, which are caused by the dead weight of the drive motor.
The connection is made via a terminal box with M12 connectors.
상품평
아직 상품평이 없습니다.