제품

Loadstar Sensors iLoad Low Profile Digital Load Cell with UART/USB Output

Loadstar Sensors iLoad Low Profile Digital Load Cell with UART/USB Output

The iLoad low profile Digital USB load cells are only 3″ in diameter and only about 0.5″ high and are great for measuring in-line compressive loads and forces under room temperature conditions where one can tare the reading at zero load, place the load and take a measurement. 

At a raw level it offers UART for easy connection with Arduino and other MicroControllers. With the included S2U Serial to USB adapter, it offers connectivity with PCs, Macs and Unix machines via the USB port. It is also powered by the USB port so no need for external power, signal conditioners or data acquisition systems!

The iLoad Series comes in a rugged, stainless steel body for industrial grade applications and convenient threaded mounting holes for easy mounting to plates and platforms.
Loadstar’s iLoad Low Profile Digital USB series of load cells provides unprecedented integration of sensing and measurement electronics in a single low profile body, to make it easy to measure, log and plot forces and loads directly on your PC with our LoadVUE Pro, SensorVUE or ControlVUE software. The built in ASCII command set provides an easy to use API to build your own custom applications.

If you are looking for an integrated, software friendly Load Cell to measure compressive loads and forces over short time periods in a temperature controlled indoor environment, you will not find a better or more convenient load cell than the iLoad Pro digital load cell!

Category:
Tag:
브랜드:

설명

iLoad Low Profile Digital Load Cell with UART/USB Output

Highlights
 

  • Capacities
    iLoad load cells are available in 50 lb, 100 lb, 250 lb, 500 lb capacities

  • Calibration Mode
    Usable for Compression measurements only

  • Accuracy Class & Compensated Temperature Range
    +/- 0.25% to +/- 1% of Full Scale from 10C to 40C non-condensing

  • Built in API
  • ASCII command set enables you to write your own software using Python, C, C++. C#, LabVIEW, Matlab and other languages


  • Mounting
    Threaded Mounting Holes on Each End of Load Cell. No need for additional adapters for most applications.

  • UART/USB Output
    Use UART to connect with Arduino or other microprocessors. Or use with S2U Serial to USB adapter to connect with PCs via USB.

    Optional Analog Output
    Analog 0-5V DC output via  pigtail or through the HX-100 Hybrid Adapter

    Unique Feature
    iLoad offers direct measurement of loads via the USB port of a PC. No need of signal conditioner, DAQ, or special software.

  • Construction and Use
    Rugged, stainless steel construction. Compact low profile design. Mecahnically robust. Weather resistant (not waterproof) packaging.

  • Customize
    Call us for larger capacities or other unique needs. We can custom build them for you as needed.

iload

상품평

아직 상품평이 없습니다.

“Loadstar Sensors iLoad Low Profile Digital Load Cell with UART/USB Output”의 첫 상품평을 남겨주세요

연관 상품