Minebea Intec / U2D1 Single Point load cell

MinebeaMitsumi Single Point Load Cell U2D1

Ideal for installation in checkweighers: The single point load cell U2D1 is ideal for dynamic applications due to its design. Suitable for load ranges from 3 kg to 100 kg and a platform size of up to 200 mm × 200 mm.

설명

U2D1 Single Point load cell

LOAD CELL TYPE: U2D1-3K to 100K — SPECIFICATIONS

Category	Item	Specification
Loading Specifications	Rated Capacity (R.C.)	29.42 N (3 kgf), 58.84 N (6 kgf), 98.07 N (10 kgf), 147.1 N (15 kgf), 196.1 N (20 kgf), 245.2 N (25 kgf), 490.3 N (50 kgf), 980.7 N (100 kgf)
	Safe Overload	200 % R.C.
	Ultimate Overload	300 % R.C.
	Rated Output (R.O.)	2 mV/V ± 0.2 mV/V
	Non-linearity	0.015 % R.O.
	Hysteresis	0.015 % R.O.
	Repeatability	0.02 % R.O.
	Creep	0.02 % R.O. / 20 min (U2D1-3K: 0.03 % R.O. / 20 min)
	Creep Recovery	0.02 % R.O. / 20 min (U2D1-3K: 0.03 % R.O. / 20 min)
Electrical Specifications	Recommended Excitation	12 V or less
	Maximum Excitation	20 V
	Zero Balance	±0.1 mV/V
	Input Terminal Resistance	420 Ω (+30 Ω / −20 Ω)
	Output Terminal Resistance	350 Ω ± 5 Ω
	Insulation Resistance (Bridge–Body)	2000 MΩ or more (DC 50 V)
Temperature Performance	Compensated Temperature Range	−10 °C to +50 °C
	Safe Temperature Range	−10 °C to +50 °C
	Temperature Effect on Zero Balance	0.04 % R.O. / 10 °C
	Temperature Effect on Output	0.012 % LOAD / 10 °C
Eccentric Load Error	Loading Plate Size	Maximum 400 mm × 600 mm
	Center of Loading Plate	Set the same position of loading plate and the center of load cell
	Error	Accuracy within 0.02 % R.O. with 1/2 of rated load applied at 150 mm from center
Others	Cable	Ø3.2 mm, 4-core shielded cable, 30 cm
	Class of Protection	Equivalent to IP40 (except cable)
	Material	Aluminium Alloy
	Fatigue Life	10⁶ times with rated load
	RoHS	Compliant