설명
Model F6137 Hydraulic ring force transducer
Geotechnical version up to 700 kN
The model F6137 hydraulic ring force transducer, geotechnical version, is available in nominal size NS 82 to 700 kN [157,366 lbf].
This hydraulic force measuring unit can, in conjunction with a measuring or display instrument, display the measured values directly or output them as analogue signals. A cylinder-piston combination, filled with hydraulic medium, in a steel version with surface coating or in stainless steel version (option), forms the basis of the anchor force measuring system. It is an extremely robust design in line with the requirements of geotechnical engineering.
For maximum availability and ease of maintenance, we offer a connection solution that enables external measured value transducers/displays to be disconnected and replaced under operating conditions without loss of hydraulic fluid.
Applications for hydraulic force measuring units can be found in the field of geotechnology in various fields such as tunnel construction, bridge building and slope stabilisation.
| Model F6137 | |
| Rated force Fnom | 0 … 80 kN to 0 … 700 kN [0 … 17,985 lbf to 0 … 157,366 lbf] |
| Nominal size | NS 82 |
| Display | ■ Pressure gauge, model 23x.50 (NS 100) ■ Digital pressure gauge, model DG-10 ■ Pressure sensor (on request) |
| Relative linearity error dlin | |
| Pressure gauge | ≤ ±1.0 % Fnom |
| Pressure sensor/digital pressure gauge | ≤ ±0.5 % Fnom |
| Temperature effect on | |
| the characteristic value TKC | 1 % Fnom /10 K |
| the zero signal TK0 | 1 % Fnom /10 K |
| Force limit FL | 100 % Fnom |
| Breaking force FB | > 130 % Fnom |
| Rated displacement snom | < 0.5 mm [< 0.02 in] |
| Rated temperature range BT, nom | -30 … +60 °C [-22 … 140 °F] |
| Ingress protection (per IEC/EN 60529) | |
| Pressure gauge | IP65 |
| Pressure sensor | IP67 |
| Digital pressure gauge | IP65 |
| Case | ■ Steel, electrogalvanised ■ Stainless steel (option) |
| Piston | ■ Steel, electrogalvanised ■ Stainless steel (option) |
| Guard bracket | |
| Pressure gauge | Yes |
| Pressure sensor/digital pressure gauge | Optional |
| Mounting type | |
| Pressure gauge | Direct mounting |
| Pressure sensor/digital pressure gauge | Direct mounting |
| Option | ■ Capillary ■ Measuring hose for “separation without any loss less connection“ |
| Output signal | 4 … 20 mA, 2-wire |
| Analogue output | |
| Supply voltage | DC 0 … 30 V for current output |
| Load | ≤ (UB – 6V) / 0.024 A |
| Electrical connection | ■ Circular connector M12 x 1, 4-pin Hand-held ■ Measuring instrument ViSens E3908 (option) |
| Fill fluid | Glycerine 70 % / water 30 % |
| Force introduction (FIT) | As full-faced as possible, min. 75 % of the piston diameter |
| Weight | 8 kg [17.64 lbs] |
Dimensions in mm [in]
| Dimensions in mm [in] | |||||||||||||
| A | B | C | D | ØE | F | G | ØH | ØI | ØJ | ØK | L | M | N |
| 120 [4.7] | 215 [8.5] | 132 [5.2] | 71 [2.8] | 33 [1.3] | 124 [4.9] | 103.5 [4.1] | 161 [6.3] | 132 [5.2] | 112 [4.4] | 52 [2] | 55 [2.16] | 5 [0.2] | 19 [0.75] |
| Version | Pressure gauge | |
| Rated force | System pressure | Model 23x.50 (NS 100) |
| kN [lbf] | bar | |
| 80 [17,985] | 100 | ■ |
| 130 [29,225] | 160 | ■ |
| 200 [44,962] | 250 | ■ |
| 250 [56,202] | 315 | ■ |
| 350 [78,683] | 400 | ■ |
| 400 [89,924] | 500 | ■ |
| 500 [112,404] | 600 | ■ |
| 600 [134,885] | 700 | ■ |
| 700 [157,366] | 800 | ■ |
| Other rated loads and versions on request | ||
■ = possible selection
Pin assignment, analogue output
| 4…20 mA (2-wire) | ||
| Pin | Connection identification | |
| Supply UB+/S+ | 1 | Brown |
| Supply UB-/S- | 3 | Blue |
| Signal S+ | 1 | Brown |
| Signal S- | 3 | Blue |
| Shield | case | case |
Output 4…20 mA, 2-wire
Circular connector M12 x 1, 4-pin
상품평
아직 상품평이 없습니다.