제품

SENSORDATA / Shaft Driven Capacity Coupled Torque Sensor T260

SENSORDATA / Shaft Driven Capacity Coupled Torque Sensor T260

  • Non-contact measurement of torque
  • High stiffness and low inertia
  • On-board shunt calibration circuit
  • Rated speed 20,000 rpm (35,000 rpm optional)
  • Internal zero velocity speed sensor
  • (optional)
  • SAE 4340 alloy steel construction with satin nickel finish
  •  
Category:
Tag:
브랜드:

설명

Shaft Driven Capacity Coupled Torque Sensor T260

Description

The T260 rotary transformer coupled torque sensor was designed for the measurement of viscosity and for in-line testing of motors, engines, transmissions, propellers, pumps, drivelines, and similar rotating devices. The T260 has 20% to 40% greater stiffness, has 4 to 6 times less rotating inertia, and is 1/3 the size of comparable models available from other suppliers. The T260 requires the use of AC carrier strain gage signal conditioning electronics such as SensorData’s I200. The optional zero velocity speed sensor is installed inside the T260 housing. Interconnecting cable assemblies are available as an option. SensorData will provide in-house calibration of the T260 with customer-supplied electronics for a fee.

Item Specification
Type Rotary
Full Scale 11.3 Nm / 22.6 Nm / 56.5 Nm / 113 Nm / 226 Nm
Maximum Speed 20,000 RPM / 35,000 RPM
Output 2 mV/V
Precision ±0.12 % FS
Excitation 2.8 V – 5 V AC
Drive Side Round Shaft with Slot for Key
Test Side Round Shaft with Slot for Key
Minimum Temperature -29 °C
Maximum Temperature 93 °C

상품평

아직 상품평이 없습니다.

“SENSORDATA / Shaft Driven Capacity Coupled Torque Sensor T260”의 첫 상품평을 남겨주세요

연관 상품