제품

Tedea Huntleigh / Model 1030 Low Profifile Single-Point Load Cell

Tedea Huntleigh / Model 1030 Low Profifile Single-Point Load Cell

The aluminum single-point load cell model 1030 is designed for direct mounting of low cost, low capacity weighing platforms. Its use in relatively large platforms, combined with its high accuracy and low cost, makes this load cell well suited for a wide range of weighing applications, including process weighing, bench scales, laboratory and money counting. OIML R60 approved and IP65 protection with an optional IP67 version. Model 1030’s built-in overload stop can provide mechanical protection against overloading. A special humidity resistant protective coating is available which ensures long-term reliability.

Category:
Tag:
브랜드: ,

설명

Model 1030 Low Profifile Single-Point Load Cell

FEATURES
• Capacities: 2–15 kg
• Aluminum construction
• Single-point 350 x 350 mm platform
• OIML R60
• IP65 protection
• Available with UNC threads
• Optional
❍ FM approval available
❍ IP67 protection available

APPLICATIONS
• Bench scales
• Counting scales
• Grocery scales

SPECIFICATIONS
PARAMETER VALUE(1) UNIT
OIML accuracy class Non-Approved C2.5  
Maximum no. of intervals (n) 1000 2500  
Y = Emax/Vmin 3333 7000  
Rated output—R.C. (Emax) 2(2), 3, 5, 7, 10, 15 kg
Rated output—R.O. 2.0 mV/V
Rated output tolerance 0.2 ±mV/V
Zero balance 0.2 ±mV/V
Zero return, 30 min. 0.0500 0.0170 ±% of applied load
Total error 0.0300 0.0200 ±% of rated output
Temperature effect on zero 0.0100 0.0040 ±% of rated output/°C
Temperature effect on output 0.0030 0.0010 ±% of applied load/°C
Eccentric loading error 0.0085 0.0057 ±% of rated load/cm
Temp. range, compensated –10 to +40 °C
Temp. range, safe –30 to +70 °C
Maximum safe central overload 150 % of R.C.
Ultimate central overload 300 % of R.C.
Excitation, recommended 10 VDC or VAC RMS
Excitation, maximum 15 VDC or VAC RMS
Input impedance 415±15 Ω
Output impedance 350±3 Ω
Insulation resistance >5000 MΩ
Cable length 1.0 m
Cable type 4 wire, PVC, single loating screen Standard
Construction Anodized aluminum  
Environmental protection IP65(3)  
Platform size (max) 350 x 350 mm
Recommended torque 7.0 N*m

(1) 1030 is a non-balanced bridge load cell

(2) 2 kg is not OIML approved

(3) IP67 available upon request

All speciications subject to change without notice.

상품평

아직 상품평이 없습니다.

“Tedea Huntleigh / Model 1030 Low Profifile Single-Point Load Cell”의 첫 상품평을 남겨주세요

연관 상품