설명
F304 Brake Pedal Force Loadcell
The F304 is a compact, low profile loadcell for measuring brake pedal application forces.
The loadcell is robust in construction with a maximum force range of 2500N (250kgf). Its multi-hole fixing allows simple attachment to any shape pedal using screws or cable ties. The low profile stainless steel design maintains the brake pedals ergonomic geometry.
Additional information can be found in Engineering Sheet E030. If you require other force ranges the F322 or F323 may be suitable.
We are happy to design variants of this loadcell to meet your specific requirements. Versions can be manufactured for fully compensated operation up to +250°C. Please consult our engineering department.
The loadcell is robust in construction with a maximum force range of 2500N (250kgf). Its multi-hole fixing allows simple attachment to any shape pedal using screws or cable ties. The low profile stainless steel design maintains the brake pedals ergonomic geometry.
Additional information can be found in Engineering Sheet E030. If you require other force ranges the F322 or F323 may be suitable.
We are happy to design variants of this loadcell to meet your specific requirements. Versions can be manufactured for fully compensated operation up to +250°C. Please consult our engineering department.
Specification
| Parameter | Value | Unit |
|---|---|---|
| Non-linearity – Terminal | ±0.05 | % RL |
| Hysteresis | ±0.05 | % RL |
| Creep – 20 minutes | ±0.05 | % AL |
| Repeatability | ±0.02 | % RL |
| Rated output – Rationalised | 2.0 | mV/V |
| Rationalisation tolerance | ±0.1 | % RL |
| Zero load output | ±4 | % RL |
| Temperature effect on rated output per °C | ±0.005 | % AL |
| Temperature effect on zero load output per °C | ±0.005 | % RL |
| Temperature range – Compensated | -10 to +50 | °C |
| Temperature range – Safe | -10 to +80 | °C |
| Excitation voltage – Recommended | 10 | V |
| Excitation voltage – Maximum | 20 | V |
| Bridge resistance | 700 | Ω |
| Insulation resistance – Minimum at 50Vdc | 500 | MΩ |
| Inclined load error – concentric at 3° | ±0.25 | % RL |
| Structural stiffness | 3.9 x 107 | N/m |
| Overload – Safe | 50 | % RL |
| Overload – Ultimate | 200 | % RL |
| Sideload – Safe | 100 | % RL |
| Sealing | IP65 | |
| Weight – Nominal (excluding cable) | 210 | g |
Order Codes
| Code | Description |
|---|---|
| F304CFR0KN | Compression, IP65, rationalised |
Notes
- AL = Applied load.
- RL = Rated load.
- Temperature coefficients apply over the compensated range.
Connections
The loadcell is fitted with 2 metres of flexible polyurethane jacketed 4 core screened cable.
Excitation + = Red, Excitation – = Blue, Signal + = Yellow, Signal – = Green, Screen = Orange.
The screen is not connected to the loadcell body.
상품평
아직 상품평이 없습니다.