설명
C6B Force Transducer: For Nominal Forces Ranging from 200 kN to 10 MN
The C6B force transducers use a compression-bar design, making them ideal for measuring extremely large forces with minimal displacement. This makes them perfectly suited for highly dynamic applications such as impact testing or fast joining processes.
The C6B series offers an outstanding price-to-performance ratio, particularly in variants with integrated electronics. These stainless-steel sensors are fully hermetically sealed and have a high degree of protection (IP68). A wide range of options enables flexible adaptation to specific measurement requirements. Versions up to 2 MN also include an internal bore, which has proven especially beneficial for monitoring anchor or rope tension.
- HBK accuracy class: 0.5
- Nominal (rated) measurement ranges: 200 kN to 10 MN
- Outputs: 2 mV/V, 0… 10 V, or 4… 20 mA, as required
- Degree of protection: up to IP68
Our tips:
-
Order the C6B together with its force-application parts to receive a fully matched and jointly calibrated system. This ensures higher measurement accuracy right in your application.
-
New: The C6B is now also available with an integrated amplifier, offering greater efficiency, outstanding reliability, and effortless setup!
| Maximum capacity (nominal load) | 2 MN, 500 kN, 200 kN, 1 MN, 5 MN, 10 MN |
| Tensile / compression | Compression |
| Type/technology | Strain Gauge |
| Calibration | Calibrated |
| Output signal | mV/V (passive strain gauge), Voltage (0…10V), Current (4-20mA) |
| Degree of protection | IP68 |
| Mechanical interfaces | Hole through type, Column type |
| Height (without accessories) | 100 mm, 60 mm, 180 mm, 240 mm |
| Diameter (without cable or plug) | 159 mm, 80 mm, 189 mm, 267 mm |
Cost-effective measurement of large forces
- Nominal (rated) forces up to 10 MN
- For static and dynamic measurements
- Exceptionally attractive price-to-performance ratio
- An internal bore facilitates the use of a fold-back arm (up to 2 MN)
Cost-effective, easy-to-use measurement equipment for many applications.
Adaptable to your application
- Output signal: mV/V, 0 – 10 V, or 4 – 20 mA
- Many options: fixed cable, mounted plugs, robust plug protection, and TEDS
- Can be mounted both horizontally and over head
- Complete calibration with loading fittings is possible on request
Efficient: Adaptable to the application and instantly ready for use.
Robust and dynamic
- Hermetically sealed housing made of stainless steel materials
- IP68 degree of protection (models with a fixed cable)
- EMC-tested in compliance with the IEC standard
- Tested for vibration and shock resistance
Long-life technology and reliable measurement results.
Now available as an option: C6B with an integrated amplifier
It’s your choice: you can now order the C6B with an integrated amplifier. VA1 with voltage output (0 –10 V) or VA2 with current output (4 – 20 mA). Neither the sensor’s dynamics nor its metrological properties change!
상품평
아직 상품평이 없습니다.